A Customer case shows why 236 cm² of projected area can generate 118,000 kgf at 500 bar and why a...
Tag Archives: hydraulic engineering
How to Correctly Install a Check Valve on a Hydraulic Cylinder in an Injection Mold
A Customer case explains how to correctly connect a hydraulic check valve, remove trapped air and release cylinder pressure before...
How to Select the Correct Hydraulic Cylinder for an Injection Mold Wedge
A real Customer case shows how Vega calculated thrust force from cavity pressure and mold geometry to select the correct...
How to Select the Correct Hydraulic Cylinder at 100 bar for an Injection Mold
A Customer case shows how Vega verified hydraulic-cylinder sizing at 100 bar by comparing thrust, pulling force, cylinder bore, operating...
How to Size a Hydraulic Cylinder for Thread Unscrewing: A Customer Case
A real Customer case explains how to calculate unscrewing force and correctly size the hydraulic cylinder, rack, pinion and gear...
Why the V260 Must Use the Correct Hydraulic Fluid: A Customer Case on Mineral Oil and Fluid Compatibility
A real Customer case explains why the V260 must use ISO VG46 mineral oil and why hydraulic-fluid compatibility is critical...
Long-Rod Hydraulic Cylinders for Injection Mold Slides: Why Alignment Is Critical
A real Customer case shows why a longer hydraulic-cylinder rod requires careful alignment between the cylinder and the injection mold...
How to Size Hydraulic Cylinders for Injection Mold Slides: A Customer Case
A real Customer case shows how cavity pressure, slide angle, surface area and friction affect hydraulic-cylinder sizing for injection mold...
How to Size a Hydraulic Cylinder for Thread Unscrewing in Injection Molds: A Customer Case
A real Customer case shows how Vega calculates the pulling force required to unscrew threaded components and select the appropriate...
How to Select the Right Hydraulic Cylinder for Injection Mold Slides: A Real Customer Case
A real Customer case shows how Vega calculates thrust and traction forces to select the correct hydraulic cylinders for injection...