V450CM Tags • Vega Cylinders Official Blog

07 September 2026

How to Increase the Oil Port Diameter of a Hydraulic Cylinder: Why the Modification Requires Precise Machining

Increasing a hydraulic cylinder oil port from 3 to 6 mm may require specific CNC machining. Discover why internal geometry...

21 August 2026

When Multiple Hydraulic Cylinders Do Not Move in Synchronization: Diagnosing an Unbalanced Oil Circuit

A Customer case shows how to diagnose synchronization problems in multiple hydraulic cylinders by checking oil-flow balance, manufacturing tolerances, piston...

20 August 2026

Long-Rod Hydraulic Cylinders for Injection Mold Slides: Why Alignment Is Critical

A real Customer case shows why a longer hydraulic-cylinder rod requires careful alignment between the cylinder and the injection mold...

20 August 2026

How to Size Hydraulic Cylinders for Plastic Part Extraction: A Customer Case with PA GF40%

A real Customer case shows how adhesion force, contact surface and hydraulic pressure influence hydraulic-cylinder selection for PA GF40% injection...

11 August 2026

How to Design the End-of-Stroke Position of a Hydraulic Cylinder in a Three-Plate Injection Mold

Discover how a special V450CM hydraulic cylinder was engineered for a three-plate injection mold requiring 130 mm stroke, a mechanical...

11 August 2026

Hydraulic Cylinders on a Three-Plate Injection Mold

Learn how hydraulic cylinders are integrated into three-plate injection molds, with practical considerations for stroke, mechanical stops, rod geometry, alignment...