Hydraulic cylinder deformation is rarely caused by manufacturing defects. This engineering guide explains the real causes of cylinder tube deformation...
Tag Archives: Injection Mold Design
Can We Use a Smaller Cylinder?
A customer wanted to know if a smaller hydraulic cylinder could be used in a large injection mold. Through force...
When the Sensor Isn’t the Problem
A failed sensor may seem like a simple problem, but repeated failures often reveal deeper issues. This case study shows...
Hydraulic Unscrewing Systems
Hydraulic unscrewing systems provide the force and flexibility required for large threaded components, deep threads, and demanding molding applications. This...
Thread Unscrewing Systems
Thread unscrewing systems are among the most complex mechanisms used in injection molds. This engineering guide explains how to select,...
Thread Release System Selection
Choosing the correct thread release system is one of the most important decisions in injection mold engineering. This article introduces...
Manual Unscrewing Systems
Manual unscrewing systems remain a practical and economical solution for low-volume threaded injection molded parts. This article explains the operating...
Force Stripping Threads
Force stripping threads is one of the most cost-effective alternatives to traditional unscrewing mechanisms. This article explains the fundamental principles...
Mechanical Unscrewing Systems
Mechanical unscrewing systems remain the most widely used solution for producing threaded plastic parts in injection molds. This article explains...
Square Dowel Core Pulling Mechanisms
Explore 12 square dowel core pulling mechanisms used in injection mold design. This expert guide covers engineering principles, side-action design,...