A real Vega technical case explains how to investigate oil leakage from hydraulic cylinders installed in injection molds, distinguishing O-ring...
Tag Archives: Hydraulic Cylinder
When Should You Use a Hydraulic Pressure Intensifier Instead of Increasing System Pressure?
Should you increase the pressure of an entire hydraulic system or use a pressure intensifier? This real engineering case explains...
Why Servo Hydraulic Machines Need Pilot-Operated Check Valves
Can a hydraulic locking cylinder remain securely locked after a servo-controlled injection molding machine switches off the hydraulic pump? This...
Does Hydraulic Port Diameter Affect Cylinder Speed?
Does increasing the hydraulic port diameter always make a cylinder faster? Through a real engineering discussion with Faurecia, the Vega...
Understanding Mold Shrinkage in Injection Mold Design
Learn how material shrinkage affects tolerances, warpage and dimensional stability in injection molding...
Fan Gate vs Pin Gate vs Tab Gate: Engineering Comparison
Technical comparison between fan gates, pin gates and tab gates in modern injection molds. Learn advantages, limitations and ideal applications...
Vega Growing in China
Vega has always aimed at a global market, welcoming all cultures and nationalities into its family. Accordingly, it’s no surprise...
Standard Innovation
Innovation has always been the hallmark of Vega. That’s why, even for the most standard of cylinders, there’s room for...
Vega Excellence—Cushioning
On some highly intensive applications, mold makers require high speeds from the components installed on the mold; of course, this...
Vega Interviews—Massimo De Luca (Support Department)
Good morning! It’s a pleasure to have the chance of knowing more about Vega Support Department! Massimo, how long have...