Learn how Vega's SIM08 manages hydraulic-cylinder position sensors on injection molds, providing individual LED diagnostics and protection against contradictory sensor...
Tag Archives: IndustrialAutomation
When a Self-Locking Hydraulic Cylinder Is Not Enough: Choosing the Right Solution for Heavy Mold Mechanisms
Discover why a self-locking hydraulic cylinder may not be suitable for heavily loaded mold mechanisms. This real engineering case explains...
How to Properly Install a Pilot-Operated Check Valve on a Hydraulic Cylinder
Learn how to correctly install a pilot-operated check valve on a hydraulic cylinder. This real engineering case explains pilot line...
How to Choose the Correct Hydraulic Cylinder Bore: Force Calculation, Operating Pressure and Proper Sizing
Learn how to correctly size a hydraulic cylinder by calculating the required force, operating pressure and bore diameter. This real...
How to Select Hydraulic Cylinders and Magnetic Sensors for ATEX Zone 22 Applications
Selecting hydraulic cylinders for hazardous environments requires more than pressure calculations. Discover how operating temperature, ATEX certification, magnetic sensors and...
How to Connect Multiple Hydraulic Cylinders to a PLC Using a Signal Interface Module
Learn how to connect three or six hydraulic cylinders to a PLC using one or two SIM08 modules. This real...
Why Excessive Precision Can Cause a Hydraulic Cylinder to Fail
Can a hydraulic cylinder fail because it is manufactured too precisely? This real engineering case explains how an intermittent unlocking...
How to Calculate the Holding Force for a Self-Locking Hydraulic Cylinder
How do engineers determine whether a self-locking hydraulic cylinder can safely withstand injection molding forces? This real engineering case explains...
Why Replacing a Hydraulic Cylinder Without Failure Analysis Can Be a Costly Mistake
Is replacing a failed hydraulic cylinder enough to solve the problem? This real engineering case demonstrates why root cause analysis...
Oil Leakage from the Rod Seal: Why Hydraulic Pressure Is Not Always the Real Cause
Does oil leaking from a hydraulic cylinder always mean defective seals? This real technical support case explains why rod seal...