A customer continued experiencing oil leaks despite repeated seal replacements. By analyzing the complete operating environment, Vega Technical Dep. uncovered...
Support
All articles about Maintenance and Support about VEGA HYDRAULIC CYLINDERS and VEGA SWITCHES and VEGA SPARE PARTS
The 2 Millimeters That Could Have Stopped an Entire Mold
A customer requested a technical review of a mold equipped with self-locking cylinders. During the analysis, Vega Technical Dep. identified...
When the Cylinder Is Not the Problem
Recurring hydraulic cylinder leaks are not always caused by defective cylinders. Learn how Vega Technical Dep. uncovered contamination, maintenance issues,...
Why Push Force Is Only Half the Story
A mold maker wanted to replace an existing hydraulic solution with self-locking cylinders. Through a complete analysis of injection forces,...
Why We Refused to Approve This Cylinder
Sometimes the most valuable engineering answer is "No". This case study shows how Vega Technical Dep. identified a hidden risk...
Can We Use a Smaller Cylinder?
A customer wanted to know if a smaller hydraulic cylinder could be used in a large injection mold. Through force...
When Repairing the Cylinder Doesn’t Solve the Problem
Repeated hydraulic cylinder failures are rarely caused by the cylinder itself. This case study shows how Vega Technical Dep. uncovered...
When the Sensor Isn’t the Problem
A failed sensor may seem like a simple problem, but repeated failures often reveal deeper issues. This case study shows...
When the Cylinder Isn’t the Problem
A damaged hydraulic cylinder is often just the symptom of a deeper engineering issue. This real case study shows how...
Thread Unscrewing Systems
Thread unscrewing systems are among the most complex mechanisms used in injection molds. This engineering guide explains how to select,...