Discover why a self-locking hydraulic cylinder may not be suitable for heavily loaded mold mechanisms. This real engineering case explains...
Support
All articles about Maintenance and Support about VEGA HYDRAULIC CYLINDERS and VEGA SWITCHES and VEGA SPARE PARTS
How to Properly Install a Pilot-Operated Check Valve on a Hydraulic Cylinder
Learn how to correctly install a pilot-operated check valve on a hydraulic cylinder. This real engineering case explains pilot line...
How to Choose the Correct Hydraulic Cylinder Bore: Force Calculation, Operating Pressure and Proper Sizing
Learn how to correctly size a hydraulic cylinder by calculating the required force, operating pressure and bore diameter. This real...
Why a Hydraulic Cylinder May Not Move During Testing Even When It Is Not Defective
Discover why a hydraulic cylinder may appear stuck during testing even when it is fully compliant. This real engineering case...
How to Select Hydraulic Cylinders and Magnetic Sensors for ATEX Zone 22 Applications
Selecting hydraulic cylinders for hazardous environments requires more than pressure calculations. Discover how operating temperature, ATEX certification, magnetic sensors and...
How to Connect Multiple Hydraulic Cylinders to a PLC Using a Signal Interface Module
Learn how to connect three or six hydraulic cylinders to a PLC using one or two SIM08 modules. This real...
Why Hydraulic Cylinder Bodies Crack Even When the Material Is Perfect
Can a hydraulic cylinder body crack even when the material and manufacturing quality are flawless? This real engineering case explains...
Why a Perfectly Manufactured Hydraulic Cylinder Rod May Still Not Fit
Can a perfectly manufactured hydraulic cylinder rod fail to fit during assembly? This real engineering case explains how thread tolerances,...
Why Repaired Hydraulic Cylinders Should Receive a New Serial Number
Why does a repaired hydraulic cylinder sometimes receive a new serial number? This real engineering case explains how replacing a...
Why Hydraulic Cylinder Seals Wear Prematurely Even When Temperature Is Not the Problem
Can mold temperature really cause premature hydraulic cylinder seal wear? This real engineering case demonstrates why operating at 85°C was...