Sizing hydraulic cylinders for die casting slides is not simply a matter of calculating injection pressure. Through a real engineering...
Tag Archives: Mechanical Engineering
Replacing a Compact Hydraulic Cylinder: Why Dimensional Compatibility Alone Is Not Enough
Replacing a compact hydraulic cylinder involves far more than matching bore, stroke and mounting dimensions. This article explains how centering...
How to Size a Hydraulic Power Unit for Multiple Cylinders in a Forming Die
Sizing a hydraulic power unit involves much more than selecting the right pump pressure. This engineering case explains how force...
How to Size a Locking Cylinder for an Injection Mold: An Engineering Calculation Case
Choosing a locking cylinder is not simply a matter of selecting the largest available model. This engineering case explains how...
When a Hydraulic Cylinder Locks Inside an Injection Mold: Why Finding the Root Cause Is More Important Than Forcing It Free
A hydraulic cylinder that suddenly locks inside an injection mold is rarely the real problem. This engineering case explains how...
Why Anodized Aluminium Hydraulic Cylinders Never Have Exactly the Same Colour
Colour variation in anodized aluminium is often misunderstood as a manufacturing defect. This engineering case explains why anodized hydraulic cylinders...
How to Calculate the Correct Hydraulic Cylinder Size for Injection Molds
Hydraulic cylinder sizing is one of the most important engineering calculations in injection mold design. This technical guide explains how...
Why Hydraulic Cylinder Tie Rods Fail: Torque, Preload and Assembly Mistakes Explained
Tie rod hydraulic cylinders rarely fail because of defective materials. Most failures originate from incorrect assembly procedures, preload loss or...
Why Hydraulic Cylinder Tubes Deform: Root Causes, Calculations and Engineering Solutions
Hydraulic cylinder deformation is rarely caused by manufacturing defects. This engineering guide explains the real causes of cylinder tube deformation...
Angle Pin Mechanisms in Injection Molds
Angle pin mechanisms are among the most widely used side-action systems in injection mold design. This technical guide explores nine...